Content 50% Acrylic, 50% Polyester
Finish Teflon®
Backing Acrylic
Weight 11.4 oz. per linear yd
Width 54″
Repeat H – N/A
V – 0.5″
Directional Yes
Railroaded Yes
Additional Attributes
Teflon Yes
Performance Characteristics
Abrasion Resistance (ASTM D4157) 90,000 double rubs
Tensile Strength (ASTM D5034) Warp: 231.5 lbs.
Fill: 124.0 lbs.
Tear Strength (ASTM D2262) Warp: 15.0 lbs.
Fill: 13.0 lbs.
Seam Slippage (ASTM D4034) Warp: 61.6 lbs.
Fill: 43.4 lbs.
Colorfastness to Crocking (AATCC 8) Dry: 5.0
Wet: 3.0
Colorfastness to Light (AATCC 16) Hours: 40
Class: 4.0
California Technical Bulletin 117 Section E Passes
NFPA 260 Class 1
UFAC Class 1
Recommended Cleaning**
S – Clean this fabric with pure solvents (petroleum distillate-based products, Energine, Carbona, Renuzit, or similar products may be used), in a well-ventilated room. Cleaning by a professional furniture cleaning service only is recommended.
Although we try hard to make sure colors on our site are accurate, actual colors may vary. Please order samples prior to making a purchase.
Final determination of the suitability of this product for an application rests with the user.
* This term and any corresponding data refer to the typical performance in the specific tests indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.
** Cleaning information is offered for general guidance and is not a guarantee. The use of certain cleaning agents can be harmful to the surface appearance and lifespan of a product. Burch Fabrics assumes no repsonsibility for damage to a product resulting from lack of cleaning, improper cleaning or the misuse of cleaning agents. Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to materials and cause permanent damage. Burch Fabrics cannot be held responsible for dye transfer caused by external contaminants.